vs-10ets..spbf series www.vishay.com vishay semiconductors revision: 12-feb-16 1 document number: 94338 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 high voltage surface mount input rectifier diode, 10 a features ? meets msl level 1, per j-std-020, lf maximum peak of 260 c ? glass passivated pellet chip junction ? designed and qualified according to jedec ? -jesd 47 ? material categorization: ? for definitions of compliance please see www.vishay.com/doc?99912 applications ? input rectification ? vishay switches and output rectifiers which are available in identical package outlines description the vs-10ets..spbf rectifier se ries has been optimized for very low forward voltage drop, with moderate leakage. the glass passivation technology us ed has reliable operation up to 150 c junction temperature. product summary package to-263ab (d 2 pak) i f(av) 10 a v r 800 v, 1000 v, 1200 v v f at i f 1.1 v i fsm 160 a t j max. 150 c diode variation single die 3 anode 1 anode ba s e cathode 2 1 2 3 to-263ab (d 2 pak) output current in typical applications applications single-phase bridge three-phase bridge units capacitive input filter t a = 55 c, t j = 125 c ? common heatsink of 1 c/w 12.0 16.0 a major ratings and characteristics symbol characteristics values units i f(av) sinusoidal waveform 10 a v rrm 800/1200 v i fsm 160 a v f 10 a, t j = 25 c 1.1 v t j -40 to +150 c voltage ratings part number v rrm , maximum peak reverse voltage v v rsm , maximum non-repetitive peak reverse voltage v i rrm at 150 c ma vs-10ets08spbf 800 900 0.5 vs-10ets10spbf 1000 1100 vs-10ets12spbf 1200 1300
vs-10ets..spbf series www.vishay.com vishay semiconductors revision: 12-feb-16 2 document number: 94338 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) when mounted on 1" square (650 mm 2 ) pcb of fr-4 or g-10 material 4 oz. (140 m) copper 40 c/w ? for recommended footprint and soldering tech niques refer to appl ication note #an-994 absolute maximum ratings parameter symbol test conditions values units maximum average forward current i f(av) t c = 105 c, 180 conduction half sine wave 10 a maximum peak one cycle ? non-repetitive surge current i fsm 10 ms sine pulse, rated v rrm applied 135 10 ms sine pulse, no voltage reapplied 160 maximum i 2 t for fusing i 2 t 10 ms sine pulse, rated v rrm applied 91 a 2 s 10 ms sine pulse, no voltage reapplied 130 maximum i 2 ? t for fusing i 2 ? t t = 0.1 ms to 10 ms, no voltage reapplied 1290 a 2 ? s electrical specifications parameter symbol test conditions values units maximum forward voltage drop v fm 10 a, t j = 25 c 1.1 v forward slope resistance r t t j = 150 c 20 m ? threshold voltage v f(to) 0.82 v maximum reverse leakage current i rm t j = 25 c v r = rated v rrm 0.05 ma t j = 150 c 0.50 thermal - mechanical specifications parameter symbol test conditions values units maximum junction and storage temperature range t j , t stg -40 to +150 c maximum thermal resistance, ? junction to case r thjc dc operation 2.5 c/w maximum thermal resistance, ? junction to ambient (pcb mount) r thja (1) 62 soldering temperature t s 260 c approximate weight 2g 0.07 oz. marking device case style to-263ab (d 2 pak) 10ets08s 10ets10s 10ets12s
vs-10ets..spbf series www.vishay.com vishay semiconductors revision: 12-feb-16 3 document number: 94338 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 1 - current rati ng characteristics fig. 2 - current rati ng characteristics fig. 3 - forward power loss characteristics fig. 4 - forward power loss characteristics fig. 5 - maximum non-re petitive surge current fig. 6 - maximum non-re petitive surge current 80 90 100 110 120 130 140 150 maximum allowable case temperature (c) average forward current (a) 246810 12 0 30 60 90 120 180 10ets.. series r thjc (dc) = 2.5 c/w conduction angle ? 100 110 120 130 140 150 90 maximum allowable case temperature (c) average forward current (a) 16 14 12 10 18 02468 dc 30 60 90 120 180 10ets.. series r thjc (dc) = 2.5 c/w ? conduction period 0 2 4 6 8 10 12 14 16 maximum average forward power loss (w) average forward current (a) 10 8 6 4 2 0 rms limit 180 120 90 60 30 10ets.. series t j = 150 c conduction angle ? 2 0 4 6 8 10 12 14 16 18 20 2468 12 10 14 16 0 dc 180 120 90 60 30 rms limit 10ets.. series t j = 150 c ? conduction period maximum average forward power loss (w) average forward current (a) peak half sine wave forward current (a) number of equal amplitude half cycle current pulses (n) 1 10 100 30 40 50 60 70 80 90 100 110 120 130 140 150 v s -10et s .. s s erie s at any rated load condition and with rated vrrm applied following s urge. initial tj = 150c at 60 hz 0.0083 s at 50 hz 0.0100 s pulse train duration (s) peak half sine wave forward current (a) 0.01 0.1 1 10 10 30 50 70 90 110 130 150 170 maximum non-repetitive s urge current ver s u s pul s e train duration. initial tj = tj max. no voltage reapplied rated vrrm reapplied v s -10et s .. s s erie s
vs-10ets..spbf series www.vishay.com vishay semiconductors revision: 12-feb-16 4 document number: 94338 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - forward voltage drop characteristics fig. 8 - thermal impedance z thjc characteristics 1 100 10 instantaneous forward current (a) instantaneous forward voltage (v) 0.5 1.0 1.5 2.0 2.5 3.0 0 t j = 25 c t j = 150 c 10ets.. series 0.1 1 10 0.0001 0.001 0.01 0.1 1 square wave pulse duration (s) z thjc - transient thermal impedance (c/w) 10 d = 0.50 d = 0.33 d = 0.25 d = 0.17 d = 0.08 steady state value (dc operation) 10ets.. series single pulse
vs-10ets..spbf series www.vishay.com vishay semiconductors revision: 12-feb-16 5 document number: 94338 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ordering information table ordering information (example) preferred p/n quantity per tube minimum order quantity packaging description vs-10ets08spbf 50 1000 antistatic plastic tube vs-10ets08strrpbf 800 800 13" diameter reel vs-10ets08strlpbf 800 800 13" diameter reel vs-10ets10spbf 50 1000 antistatic plastic tube vs-10ets10strrpbf 800 800 13" diameter reel VS-10ETS10STRLPBF 800 800 13" diameter reel vs-10ets12spbf 50 1000 antistatic plastic tube vs-10ets12strrpbf 800 800 13" diameter reel vs-10ets12strlpbf 800 800 13" diameter reel vs-10ets08spbf 50 1000 antistatic plastic tube links to related documents dimensions www.vishay.com/doc?95046 part marking information www.vishay.com/doc?95054 packaging information www.vishay.com/doc?95032 2 - current rating (10 = 10 a) 3 - circuit configuration: e = single diode 4 - package: t = to-220ac 5 - type of silicon: s = standard recovery rectifier 6 - voltage code x 100 = v rrm 7 - s = to-220 d 2 pak (smd-220) version 8 - none = tube trl = tape and reel (left oriented) trr = tape and reel (right oriented) 9 - pbf = lead (pb)-free 08 = 800 v 10 = 1000 v 12 = 1200 v 1 - vishay semicondutors product device code 5 1 3 2 4 6 7 8 9 vs- 10 e t s 12 s trl pbf
outline dimensions www.vishay.com vishay semiconductors revision: 08-jul-15 1 document number: 95046 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 d 2 pak dimensions in millimeters and inches notes (1) dimensioning and tolerancing per asme y14.5 m-1994 (2) dimension d and e do not include mold flas h. mold flash shall not exceed 0.127 mm (0 .005") per side. these dimensions are measu red at the outmost extremes of the plastic body (3) thermal pad contour optional with in dimension e, l1, d1 and e1 (4) dimension b1 and c1 a pply to base metal only (5) datum a and b to be dete rmined at datum plane h (6) controlling dimension: inch (7) outline conforms to jedec ? outline to-263ab symbol millimeters inches notes symbol millimeters inches notes min. max. min. max. min. max. min. max. a 4.06 4.83 0.160 0.190 d1 6.86 8.00 0.270 0.315 3 a1 0.00 0.254 0.000 0.010 e 9.65 10.67 0.380 0.420 2, 3 b 0.51 0.99 0.020 0.039 e1 7.90 8.80 0.311 0.346 3 b1 0.51 0.89 0.020 0.035 4 e 2.54 bsc 0.100 bsc b2 1.14 1.78 0.045 0.070 h 14.61 15.88 0.575 0.625 b3 1.14 1.73 0.045 0.068 4 l 1.78 2.79 0.070 0.110 c 0.38 0.74 0.015 0.029 l1 - 1.65 - 0.066 3 c1 0.38 0.58 0.015 0.023 4 l2 1.27 1.78 0.050 0.070 c2 1.14 1.65 0.045 0.065 l3 0.25 bsc 0.010 bsc d 8.51 9.65 0.335 0.380 2 l4 4.78 5.28 0.188 0.208 c b detail a c2 a a a 0.004 b m a lead tip (3) (3) view a - a (e) (d1) e1 b h a1 detail ?a? rotated 90 cw scale: 8 :1 l gauge plane 0 to 8 l3 l4 seating plane section b - b and c - c scale: none (4) (4) ( b , b 2) b 1, b 3 (c) c1 base metal plating conforms to jedec ? outline d 2 pak (smd-220) 13 2 d c a l2 e (2)(3) (2) 4 h bb 2 x b 2 x b 2 l1 0.010 a b m m (3) e 2 x pad layout min. 11.00 (0.43) min. 9.65 (0.3 8 ) min. 3. 8 1 (0.15) min. 2.32 (0.0 8 ) 17.90 (0.70) 15.00 (0.625) 2.64 (0.103) 2.41 (0.096)
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
